Motorhome Canopy Installed in Burgess Hill

Daniel contacted us with the requirement for a custom motorhome canopy. Daniel needed the canopy to provide protection for his rather tall motorhome. We were the right company for Daniel because the space was awkward, the canopy was tall and of course Daniel wanted something that looked good!

This canopy had to be wrapped around a tree. This was the most sensible way to make sure that there was enough space for the motorhome inside the space and that it was well protected from the elements, which was the point of the canopy.

Motorhome-With-Tree-001
Motorhome-With-Tree-002
Motorhome-With-Tree-003
Motorhome-With-Tree-004

After a number of conversations with our technical team, Daniel decided to go ahead with a site survey so that we could scan the spaces with our very clever scanning kit and create a 3D video walkthrough video for him. The 3D visual showed Daniel that we could design the canopy so that it would fit the space perfectly. As well as this, the visual showcased the aesthetics reassuring Daniel that the canopy would look stunning. 

The final price for the solution was as expected and once Daniel placed his order, our design engineers started the engineering and production models. Our designers and surveyors checked that the model included particular custom elements of the solution such as wall-attached cranked posts and the wrap around the tree.

Due to the height of the canopy it had to go through planning permission, Daniel made the submission with some help from our team.

After obtaining planning permission the canopy solution was signed off as Daniel was happy and before we knew it the canopy was being manufactured.

Daniel requested for the canopy to be powder-coated in RAL 9005 (Jet Black) as he loved the contemporary modern look. Bronze polycarbonate was selected for the roof material as Daniel wanted to keep the cleaning of the roof to a minimum. There are lots of trees above this canopy so the Bronze polycarbonate is the best choice in this situation.

Once the canopy had been manufactured we arranged a suitable installation date with Daniel … We try to be as flexible as possible so that all of our customers needs are met. 

After just two days, the whole canopy solution had been erected, concreted into the ground and secured to the property. Needless to say our customer was over the moon with the finished product and the service that he had received throughout the project.

Canopy Specifications

Location Burgess Hill
Purpose Motorhome Canopy
Width 3.5m
Length 9.5m
Eaves Height 3.3m
Structure Colour Jet Black (RAL 9005) Fine Textured
Polycarbonate Roof Colour Bronze Structured

Thinking about purchasing a carport or patio canopy? If you would like more information please get in touch. If you would like to request an estimate please use our Get a Quote! enquiry page.

Leave a Reply

Your email address will not be published. Required fields are marked *