Karen & Bruce approached us in need of a motorhome canopy. They wanted a canopy that would protect their motorhome from the elements. Both Karen & Bruce decided on Bronze polycarbonate sheets to hide any debris falling on top of the canopy from the acorn tree situated to the rear of their motorhome.
Aesthetics were a priority for Karen & Bruce as they wanted their motorhome canopy to match the black gutters and downpipes of their timber garage, located right next to their motorhome. Therefore they chose their canopy to be powder coated in Jet Black (RAL 9005), giving it a modern and contemporary look.
During our survey we discussed the motorhome canopy with Karen & Bruce. The canopy install itself was going to be straight forward. We would bolt down the leg posts to the concrete surface, and due to the height of the motorhome canopy, planning permission was required.
Whilst Bruce went through planning permission with the local authority, we were able to assist by providing draft CAD drawings, photos and structural information to help with the planning process. Once planning permission had been granted, they were eager to move to the next stage, place an official order and request production CAD drawings.
Our team confirmed the manufacture date and then contacted Karen & Bruce and organised an installation date that suited their schedule. Due to the efficiency of our team, we managed to complete the installation in the time planned.
Karen & Bruce were over the moon with the finished product.
|Eaves Height||3 metres|
|Frame Colour||Jet Black (RAL 9005)|
|Polycarbonate Roof Colour||10mm Bronze|
Thinking about purchasing a motorhome carport canopy? If you would like more information please get in touch. If you would like to request an estimate please use our Get a Quote! enquiry page.