Keith approached us with the requirement for a long driveway carport/canopy to be installed at the side of his property. The carport canopy needed to be fairly long so that it would stretch the length of his property, all the way up to the garage. Keith wanted as much privacy as possible for when he is parked and/or working on the driveway.
Our customer Tony, approached us with a requirement for a quarter curve carport. Aesthetics were very important to Tony as the carport was to be installed at the side of his property, behind his gate. Our most stylish canopy was the ideal choice for Tony with its premium quality and extremely contemporary appearance, mainly due to the contrast between his grey fascia, windows, doors and framework. The initial visit to Sutton Coldfield was to discuss his needs, the area was relatively straightforward to cover.
Our customer, Peter, approached us with a requirement for a single carport to be installed to the side of his garage. Peter has an unusual garage roof, which varies in shape and height. Nevertheless, we knew that our wall attached carport would meet all of our customer’s requirements.
Beth at Cowan Architects approached us with a requirement for a wide double carport to be installed at the front of their customer’s property. Cowan Architects predominantly deal with homes that are set up for the disabled. We had to meet certain requirements, such as working around the soffits, fascias, roof line and the downpipe position. The downpipe had to exit into the existing eco drain.
Mandy approached us with a requirement for a carport canopy to replace her existing garage, which was contaminated with asbestos. Mandy arranged for her garage to be taken down by asbestos specialists. Her previous garage wasn’t wide enough to store a vehicle in, so she wanted her new carport canopy to cover her property and provide parking and shelter right to the back of the property. Mandy wanted a gate installed on the front of her carport, so with that in mind we manufactured and supplied a post with welded gate hooks.
Andrew approached us in search of a made-to-measure motorhome canopy to cover his motorhome vehicle. Andrew recently had a new garage built, along side a long concrete slab, intended for his motorhome canopy. With the installation of the concrete slab, we decided to do bolt-to-surface leg posts. We needed to get the dimensions of Andrew’s garage in order to workout the height and length in which was needed for the motorhome canopy.
Mike at Leighton Vans contacted us looking for a large tapered Vehicle Valet bay attached to the side of his building. Mike wanted the vehicle valet bay installed to protect his workers from the weather elements and to stop overspray from the jet wash.
Jonathan approached us with a need for a free-standing double carport canopy, which he wanted to be installed at the front of his double garage. With winter approaching, Jonathan wanted to ensure the protection of his vehicles from the weather elements. To further protect his vehicles, Jonathan opted to have stormshield infills, which is temporary solution. The stormshield infills can be kept in place if required.
Wendy approached us with the need of a free-standing Double Carport Canopy. Wendy had already been granted planning permission for a large canopy to be installed at the side of her house, so this sped things up a little bit! Our customer told us that she had been looking for a Carport Canopy for years until she came across Kappion. Wendy knew that Kappion could provide her with the perfect canopy solution that would best suit her needs.
John approached us with a requirement for a premium patio canopy to cover his paved area at the rear of the house. During the summer months John enjoys entertaining outside in the garden and spending time with family and friends. Our ultimate patio canopy enables John to entertain outdoors all year around.
